Home > News > How to Change Brake Pads on 2016 Honda CRV
How to Change Brake Pads on 2016 Honda CRV

How to Change Brake Pads on 2016 Honda CRV

  As the owner of a 2016 Honda CR-V, you may already be aware of the importance of replacing brake pads. Brake pads are key components in automobile braking systems and play a vital role in vehicle safety and performance. However, many car owners may not know how to properly replace brake pads, or choose to go to a repair shop for this work, which not only increases the cost, but may also affect braking performance due to incorrect replacement methods. This article will guide you on how to replace the brake pads on your 2016 Honda CR-V yourself, allowing you to complete the job safely and economically.

 Preparations for replacing Honda CRV brake pads

  Before you begin replacing honda CRV brake pads, make sure you have the following tools and accessories:

  new brake pads

  Brake pad removal tool

  screwdriver

  Jack (if necessary)

  Protective glasses and gloves

  The right tire wrench

  Cleaners and wipes

honda CRV brake pads

 2016 Honda CRV brake pad replacement steps

  Vehicle preparation: First, park the vehicle on flat ground and make sure there are no other obstacles. Apply the handbrake and shift the gear into Park. If necessary, use a jack to jack up the vehicle to ensure a safe replacement process.

  Tire mounting: Use a suitable tire wrench to loosen the tire mounting screws, but do not remove them completely.

  Remove old brake pads: Use a brake pad removal tool to remove the old brake pads from the brake caliper. Be careful not to use brute force to avoid damaging other components.

  Cleaning: Use detergent and a rag to remove impurities and residue from the brake calipers and discs.

  Install new brake pads: Install the new brake pads on the brake caliper in the correct direction. Make sure the brake pads and discs fit perfectly with no gaps.

  Adjustment: Gently press the brake pads so that they are in close contact with the brake disc. Then adjust the position of the brake caliper to ensure that the gap between the brake pad and brake disc is even.

  Fix the tire screws: After completing the replacement, tighten the tire screws to the specified torque.

  Test: Start the engine and lightly press the brake pedal a few times to make sure the brake system is working properly. If there is any abnormality, please check and adjust.

CRV brake pads

 Things to note when replacing CRV brake pads

  Before making a replacement, make sure you understand the basic working principles and safe operating procedures of the brake system. If you're not sure what to do, seek professional help.

  During operation, please wear protective glasses and gloves to ensure personal safety.

  Please ensure that the brake pads and brake discs match the model to avoid affecting braking performance and safety.

  When installing new brake pads, make sure they fit snugly into the disc and are free of debris or residue. Use detergent and a rag to clean if necessary.

  When tightening tire screws, use an appropriate torque wrench to ensure safety and stability.

  After completing the replacement, please perform a test drive to ensure that the brake system is working properly. If there is any abnormality, please check and adjust it in time.

  By following the steps and precautions provided in this article, you should be able to safely and affordably replace the brake pads on your 2016 Honda CR-V yourself at home. Please pay attention to safety during operation and ensure that all parts match and are installed correctly. If you have any questions or need further assistance, please consult a professional or Honda dealer.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Contact form

1 of 4